2797 - Tektronix Spectrum Analyzers





2797 - Tektronix Spectrum Analyzers

The Tektronix 2797 spectrum analyzer is a wide band, very sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the Tektronix 2797. The CRT displays received signal strength (y-axis) against frequency ( x-axis).

  • Minimum Frequency 100 kHz 
  • Maximum Frequency 7.1 GHz 
  • Frequency Accuracy 0.007 % 
  • Zero Span Yes 
  • Minimum Span 100 Hz 
  • Maximum Span 4 GHz 
  • Minimum Sweep Time 200 us 
  • Maximum Sweep Time 100 s 
  • Minimum Resolution Bandwidth 10 Hz 
  • Maximum Resolution Bandwidth 3 MHz 
  • Minimum Video Bandwidth 0.3 Hz 
  • Maximum Video Bandwidth 30 kHz 
  • Maximum Safe AC Input 1 dBm 
  • Minimum Displayed Average Noise -130 dBm 
  • Maximum Displayed Average Noise -95 dBm 
  • Maximum Dynamic Range 134 dB 
  • Maximum Amplitude Uncertainty 5 %
  • Input Impedance 50 Ohm  
  • Trigger Source External,Internal 
  • Trigger Modes Freerun,TTL 
  • Probe Power Yes 
  • Noise Source Driver No 
Specifications
Low end frequency limit
100.00 kHz

High end frequency limit
7.10 GHz

Resolution Bandwidth Min.
10 Hz

Resolution Bandwidth Max.
3.00 MHz

Amplitude Range
n/a

Prestige Test Equipment Inc is an independent distributor and is not affiliated with Agilent Technologies.


Copyright © 2024 Prestige Test Equipment. Powered by Zen Cart