DHP Series - 16 kW to 20 kW - Sorensen Power Supplies DC

The DHP family provides models ranging in output power from 5 kW to 20 kW in a single chassis. Programmable output voltages range from 5V to 400 VDC, delivering up to 3,000 amperes. This family has two operational modes, constant-voltage and constant-current.

The DHP family uses control technology that allows 9 auto sequence steps, each step can be up to 99,999 seconds in duration. Combining all the steps allows a maximum auto-step program 27.7 hours long. Various voltages, currents and durations can be programmed for each step.

This family has standard analog and a variety of combinations of IEEE-488.2, RS 232 and/or isolated analog input control interface options.

All models come with the standard Sorensen 5-year warranty and CE Mark.

• Modular Design : The series has a unique modular design that results in three rackmount profiles according to output power
• Unique Controls and Commands
  • Power-Off Memory: Enabling the input power and pushing the LAST SET button will restore the supply settings
  • External Shutdown: An external shut down to inhibit the output
  • Up/down arrows control voltages, step changes and current
• Sequencing
• Digital Displays
  • Power supply rating
  • Output power, voltage and current
  • All power, voltage and current set points and limits
  • Present and highest AC input voltage
  • Present and highest air inlet temperature
  • Power and auto-step sequence settings
  • Calibration set-up
  • Remote operation set-up 
  • Diagnostics fault status summary
• Protection and Safety
  • Safe Power-Up: In the local mode, the output is disabled for additional safety at power up
  • Front Panel Lockout: Most front panel controls are disabled when operated remotely
  • Overvoltage, over-temperature, surge limit, soft start, brown out and short circuit protection current limit fold back
• 5 Year Warranty