The PNA-X network analyzer series provides the widest range of measurement applications for amplifiers, converters, antennas, or mixers with a single connection.
You can choose from four frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, and 50 GHz.
The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
- Single-connection, multiple measurements.This configurable 2- or 4-port network analyzer offers a unique single-connection solution for CW and pulsed S-parameter, compression, IMD, and noise figure measurements
- 2 or 4 ports with two built-in sources
- 126 dB system and 129 dB receiver dynamic range, 32,001 points, 32 channels, 5 MHz IF bandwidth
- High output power (+16 dBm), low harmonics (-60 dBc) and a wide power sweep range (41 dB)
- Best dynamic accuracy: 0.1 dB compression with +15 dBm input power at the receiver
- Low noise floor of -111 dBm at 10 Hz IF bandwidth
- 10.4 inch touch screen, simple interface with pull down menus, hard and soft keys, and online help
- Exceptional performance.A receiver compression spec of 0.1 dB at +12 dBm improves accuracy at high power levels, while high stability reduces the number of calibrations, thereby saving time and increasing measurement confidence
- Internal signal-routing switches for connecting the DUT to external instruments such as a digitally modulated signal generator and signal analyzer
- Only network analyzer with internal pulse modulators and generators for fast, simplified pulse measurements
- Built-in combiner that eliminates the need to find and hook up external combiners, further simplifying the setup for IMD measurements
- Optional NVNA application
- Ability to make measurements in waveguide bands from 50 GHz to 0.5 THz by adding one of the two Agilent millimeter-wave test controllers and millimeter-wave modules.With an IF inputs option (Option 020), engineers can connect the PNA-X directly to either the 2-port (N5261A) or 4-port (N5262A) millimeter-wave test set without an external source, transforming the PNA-X into a 2- or 4-port millimeter-wave component measurement system
Specifications
Instrument Type
Vector, S-Parameter
Low end frequency limit
10.00 MHz
High end frequency limit
50.00 GHz
Output Power Range
+16 dBm high power output, 41 dB power sweep range
Input Noise Level
-111 dBm noise floor at 10 Hz IF bandwidth
